My paint looks patchy or uneven. Is this normal?
Yes, especially after only one or two coats. The paint absorbs more where more old paint was removed. Further coats even out the absorption and give a consistent sheen.
Stains are bleeding through the paint. What can I do?
Spot-treat those areas with shellac knotting primer. Bleeding is less common on old timber and more visible under white paint.
What should I do if the paint drips?
Wipe drips off straight away. Sand off older drips. Drips usually mean too much paint is being applied—brush it out thinner.
Can linseed oil paint be sprayed?
We recommend applying it by brush. A good natural-bristle brush works the oil and pigment into the wood rather than leaving it on the surface, and the pigment grain can be too coarse for a spray gun.
Can I apply linseed oil paint with a roller?
We recommend a natural-bristle brush. Brushing works the paint into the timber and gives greater control over the thin, even coats required for the best results. For large surfaces or alternative application methods, contact us for guidance.